Chapter 5 SCSI Drive Installation 103
9.
NT should now recognize the SDMS Miniport driver and the
SCSI hardware. At this point, simply follow the Microsoft
Windows NT installation procedure.
Existing System Installation
This procedure will install the NCRSDMS.SYS driver onto an
existing Windows NT system. Use this procedure when NT has
been previously installed onto an IDE drive.
1.
Boot NT and log on as Administrator.
2.
Open the Main window in the Program Manager.
3.
Double-click on Windows NT SetUp.
4.
Choose Options, then choose Add/Remove SCSI Adapters...,
then choose Add.
5.
On the SCSI Adapter list, go to the bottom and choose Other.
6.
When prompted, insert the SDMS SCSI Drivers disk. For the
path to the SDMS files, leave a:\ and select OK.
7.
On the Select OEM Option menu, the SDMS Miniport driver
should be highlighted. If it is not highlighted, select it. Choose
OK.
8.
On the Select SCSI Adapter Option menu, choose Install with
the SDMS driver highlighted. At this point, the following
message may occur:
The driver(s) for this SCSI Adapter are already on
the system. Do you want to use the currently
installed driver(s) or install new one(s)?
Selecting Current will use the driver already on the system,
and selecting New will use the driver on the floppy disk.
Either option leads to step nine.
9.
For the path to the OEM SCSI adapter files, leave a:\ and
select Continue.
10. On the SCSI Adapter Setup menu, choose Close.
11. Rebooting will load the SDMS Miniport driver.