74 PCA-6157/6157L User's Manual
a. Make sure that all the SCSI devices are configured at
different ID numbers (boot drive should have lowest ID).
b. Make sure both, but only the ends of the SCSI bus are
terminated.
c. Make sure the device driver is listed in CONFIG.SYS (and
loaded when booting).
• DEVICE DRIVER DOES NOT SEE ONE OF THE SCSI
DEVICES.
a. Reboot the computer.
b. Make sure the SCSI devices have different ID numbers (boot
drive should have lowest ID).
c. Make sure bot but only the ends of the SCSI bus are
terminated.
d. Check the cable and power connections.
• OS/2 INSTALLS TO AN IDE DRIVE IN THE SYSTEM
INSTEAD OF TO THE SCSI DRIVE.
a. The IDE drive must be physically disconnected and disabled
in CMOS setup before attempting to install to a SCSI drive.
• NCR ADD ERROR: ONE OF YOUR HOST ADAPTERS IS
MALFUNCTIONING.
a. Typically an interrupt problem. System BIOS may not be
assigning interrupt properly. Check CMOS setup for PCI
slot setup. Assign or change interrupt assigned to the slot in
which the NCR adapter is placed. Reboot computer.
Important Additional Information
High Speed Tape Drive Support High-speed tape backup has
become essential to computer systems as the capacities of hard
disk drives have increased. For example, the NCR OS2CAM.ADD
driver provides support for the Sytos Plus Version 1.35 (or above)
Tape Backup System, and will function properly with the Sytos
Plus software.
