Advantech MIC-5332, User Manual

Page: 6 / 129

Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Keep this equipment away from humidity.
4. Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
5. All cautions and warnings on the equipment should be noted.
6. Always use caution when handling/operating the computer. Only qualified, experienced,
authorized electronics service personnel should access the interior of the computer. Te
power supplies produce high voltages and energy hazards, which can cause bodily
harm.
7. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over-voltage.
8. Never pour any liquid into an opening. This may cause fire or electrical shock.
9. If one of the following situations arises, get the equipment checked by service personnel:
„
The power cord or plug is damaged.
„
Liquid has penetrated into the equipment.
„
The equipment has been exposed to moisture.
„
The equipment does not work well, or you cannot get it to work according
„
The equipment has been dropped and damaged.
„
The equipment has obvious signs of breakage.
10. The sound pressure level at the operator’s position according to IEC 704-1:1982 is no
more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all
responsibility for the accuracy of any statements contained herein.
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from damage.
1.
To avoid electrical shock, always disconnect the power from your system chassis before
you work on it. Don’t touch any components on the CPU card or other cards while the
system is on.
2. Disconnect power before making any configuration changes. The sudden rush of power
as you connect a jumper or install a card may damage sensitive electronic components.
3. When
unpacking a static-sensitive component from its shipping carton, do not
remove the component's antistatic packing material until you are ready to install
the omponent in a computer. Just before unwrapping the antistatic packaging, be
sure you are at an ESD workstation or grounded. This will discharge any static
electricity that may have built up in your body.
4. When
transporting a sensitive component, first place it in an antistatic container
or packaging.
We Appreciate Your Input
Please let us know of any aspect of this product, including the manual, which could use
improvement or correction. We appreciate your valuable input in helping make our products
better.