Advantech MIC-5332 User Manual Download Page 96

Page: 96 / 129

6.1 HPM.1 Upgrade Functionality

All firmware updates/upgrades (IPMC firmware, FPGA configuration and BIOS SPI

Flash) can be performed through HPM.1 over IPMI. Please follow the procedures

described in the following sections.

6.2 IPMItool

Before upgrading, users need to prepare an update utility called “IPMItool” or any

other HPM.1 compliant upgrade agent. For simplicity, the remaining descriptions

reference IPMITool.

HPM.1 provides a way to upgrade firmware via different interfaces on ATCA platforms:

‐

LAN interface (RMCP),

‐

KCS (on-board payload interface – OS support needed), or

‐

IPMB (bridged via the Shelf Manager).

The following upgrade processes use KCS as interface over which upgrades are

delivered to the IPMC. Using LAN or IPMB is similar, only the interface parameter in

the related IPM command / IPMI tool needs to be adjusted accordingly.

6.3 BMC Upgrade

6.3.1 Upload the new BMC image

Type IPMItool HPM.1 upgrade command and select the new IPMC firmware

image.

Summary of Contents for MIC-5332


































































































































Search results

Summary of Contents for MIC-5332

Reviews:

Related manuals for MIC-5332

Brands by name

Popular brands

Advantech MIC-5332, User Manual

Search results

Summary of Contents for MIC-5332

Reviews:

Related manuals for MIC-5332

Brands by name

Popular brands