Advantech MIC-5332 User Manual Download Page 101

Page: 101 / 129

6.4.4 Verify successful Upgrade

To verify the update process the hpm check of the IPMItool can be used again.

Now the FPGA Backup Version should be the former active version, and the

active version should be the version of the upload file.

6.5 BIOS Upgrade

[root@localhost ~]# ipmitool hpm check

PICMG HPM.1 Upgrade Agent 1.0.2:

-------Target Information-------

Device Id : 0x22

Device Revision : 0x81

Product Id : 0x5332

Manufacturer Id : 0x2839 (Advantech)

---------------------------------

|ID | Name | Versions |

---------------------------------

| 0 |5332 BL | 0.45 | --.-- |

| 1 |5332 IPMC | 0.45 | 0.45 |

|*2 |5332 FPGA | 2.14 | 2.13 |

|*3 |5332 BIOS | 0.23 | 0.23 |

|*4 |5332 NVRAM | 0.04 | --.-- |

---------------------------------

(*) Component requires Payload Cold Reset

Summary of Contents for MIC-5332


































































































































Search results

Summary of Contents for MIC-5332

Reviews:

Related manuals for MIC-5332

Brands by name

Popular brands

Advantech MIC-5332, User Manual

Search results

Summary of Contents for MIC-5332

Reviews:

Related manuals for MIC-5332

Brands by name

Popular brands