Advantech EKI-7706 Series, User Manual

Page: 78 / 165

EKI-7706 Series User Manual 65
The ensuing table for STP Port Status lists the following settings (informational
only):
Port, Admin Enable, Path Cost, Edge Port and P2P MAC
4.5.10.3 STP Bridge Settings
The STP Bridge Settings page allows you to configure the priority, forward delay,
maximum age, Tx hold count, and the hello time for the bridge.
To access this page, click L2 Switching > Spanning Tree > STP Bridge Settings .
Figure 4.43 L2 Switching > Spanning Tree > STP Bridge Settings
The following table describes the items in the previous figure.
The ensuing table for STP Bridge Information lists the following settings
(informational only):
Priority, Forward Delay, Max Age, Tx Hold Count and Hello Time
The ensuing table for STP Bridge Status lists the following settings (informational
only):
Bridge Identifier, Designated Root Bridge, Root Path Cost, Designated Bridge,
Root Port and Last Topology Change
Item Description
Priority Click the drop-down menu to select the STP bridge priority.
Forward Delay Enter the variable (4 to 30) to set the forward delay for STP bridge
settings.
Max Age Enter the variable (6 to 40) to set the Max age for STP bridge settings.
Tx Hold Count Enter the variable (1 to 10) to designate the TX hold count for STP
bridge settings.
Hello Time Enter the variable (1 to 10) to designate the Hello Time for STP bridge
settings.
Apply Click Apply to save the values and update the screen.