Advantech EKI-7706 Series, User Manual

Page: 61 / 165

48 EKI-7706 Series User Manual
The ensuing table for LAG Management Information lists the following settings
(informational only):
LAG, Name, Type, Link State, Active Member, Standby Member, Edit and Clear
4.5.3.3 LAG Port Settings
The LAG Port Settings page allows you to enable or disable, set LAG status, speed
and flow control functions.
In this example we will configure a LAG between the following switches:
To access this page, click L2 Switching > Link Aggregation > LAG Port Settings .
Figure 4.21 L2 Switching > Link Aggregation > LAG Port Settings
The following table describes the items in the previous figure.
The ensuing table for LAG Port Status lists the following settings (informational
only):
LAG, Description, Port Type, Enable State, Link Status, Speed, Duplex, FlowCtrl
Config and FlowCtrl Status
4.5.3.4 LACP Priority Settings
The LACP Priority Settings page allows you to configure the system priority for LACP.
To access this page, click L2 Switching > Link Aggregation > LACP Priority
Settings .
Figure 4.22 L2 Switching > Link Aggregation > LACP Priority Settings
Ports Click the drop-down menu to select designated ports: FE1-4 or
GE1-2.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
LAG Select Click the drop-down menu to select a predefined LAG trunk definition:
LAG 1-8.
Enabled Click the radio button to enable or disable the LAG Port.
Speed Click the drop-down menu to select the port speed: Auto, Auto-10M,
Auto-100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Flow Control Click the radio button to enable or disable the Flow Control for the
LAG Port.
Apply Click Apply to save the values and update the screen.