Advantech EKI-7706 Series, User Manual

Page: 48 / 165

EKI-7706 Series User Manual 35
The ensuing table for IF MIB Counters lists the following settings (informational
only):
ifInOctets, ifInUcastPkts, ifInNUcastPkts, ifInDiscards, ifOutOctets, ifOutUcastP-
kts, ifOutNUcastPkts, ifOutDiscards, ifInMulticastPkts, ifInBroadcastPkts, ifOut-
MulticastPkts and ifOutBroadcastPkts
The ensuing table for Ether-Like MIB Counters lists the following settings
(informational only):
dot3StatsAlignmentErrors, dot3StatsFCSErrors,
dot3StatsSingleCollisionFrames, dot3StatsMultipleCollisionFrames,
dot3StatsDeferredTransmissions, dot3StatsLateCollisions,
dot3StatsExcessiveCollisions, dot3StatsFrameTooLongs,
dot3StatsSymbolErrors, dot3ControlInUnknownOpcodes, dot3InPauseFrames
and dot3OutPauseFrames
The ensuing table for Rmon MIB Counters lists the following settings (informational
only):
etherStatsDropEvents, etherStatsOctets, etherStatsPkts, etherStatsBroadcastP-
kts, etherStatsMulticastPkts, etherStatsCRCAlignErrors, etherStatsUnderSizeP-
kts, etherStatsOverSizePkts, etherStatsFragments, etherStatsJabbers,
etherStatsCollisions, etherStatsPkts64Octets, etherStatsPkts65to127Octets,
etherStatsPkts128to255Octets, etherStatsPkts256to511Octets,
etherStatsPkts512to1023Octets and etherStatsPkts1024to1518Octets
4.3.3.2 Port Utilization
To access this page, click Monitoring > Port Monitoring > Port Utilization .
Figure 4.6 Monitoring > Port Monitoring > Port Utilization
The following table describes the items in the previous figure.
4.3.4 Link Aggregation
The Link Aggregation function provides LAG information for each trunk. It displays
membership status, link state and membership type for each port.
To access this page, click Monitoring > Link Aggregation .
The ensuing table for Link Aggregation Group Status lists the following settings
(informational only):
LAG, Name, Type, Link State, Active Member and Standby Member
The ensuing table for LACP Information lists the following settings (informational
only):
LAG, Port, PartnerSysId, PnKey, AtKey, Sel, Mux, Receiv, PrdTx, AtState and
PnState
Item Description
Refresh period Click the drop-down menu to select and designate a period (second
intervals) to refresh the information (TX and RX) listings.
IFG Click the drop-down menu to enable or disable the Interframe Gap
(IFG) statistic.