Advantech EKI-7706 Series, User Manual

Page: 141 / 165

128 EKI-7706 Series User Manual
4.10.5 DDM
The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM .
Figure 4.134 Diagnostics > DDM
The following table describes the items in the previous figure.
The ensuing table for Diagnostic Alarm Information lists the following settings
(informational only):
Diagnostic Alarm
Figure 4.135 Diagnostics > DDM
The following table describes the items in the previous figure.
The ensuing table for Vendor Info lists the following settings (informational only):
Refresh , Port, Connector, Speed, VendorName, VendorOui, VendorPn, Vendor-
Rev, VendorSn and DateCode
Item Description
Diagnostic Alarm Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Apply Click Apply to save the values and update the screen.
Item Description
High Alarm Click Enabled or Disabled to set the alarm state.
High Warning Click Enabled or Disabled to set the alarm state.
Low Alarm Click Enabled or Disabled to set the alarm state.
Low Warning Click Enabled or Disabled to set the alarm state.
Apply Click Apply to save the values and update the screen.