Advantech EKI-7706 Series, User Manual

Page: 146 / 165

EKI-7706 Series User Manual 133
The ensuing table for Local Users lists the following settings (informational only):
User Name, Password Type, Privilege Type and Delete
4.11.7 Reset System
To access this page, click Tools > Reset System .
Click Restore to have all configuration parameters reset to their factory default val-
ues. All changes that have been made will be lost, even if you have issued a save.
Click Select Excepted Configuration to keep the configuration you selected when
resetting.
Reset settings take effect after a system reboot.
4.11.8 Reboot Device
To access this page, click Tools > Reboot Device .
Click Reboot to reboot the switch. Any configuration changes you have made since
the last time you issued a save will be lost.
4.12 Modbus/TCP Mapping
The data map addresses of Advantech switches shown in the following table start
from Modbus address 30001 for function code 4.
In the given example, the address offset 0x1000 (hex) equals Modbus address
34097, while the address offset 0x1100 (hex) equals Modbus address 34353.
The information given by the Advantech is shown in hex mode.
Password Type Click the drop-down menu to define the type of password: Clear Text ,
Encrypted or No Password .
Password Enter the character set for the define password type.
Retype Password Retype the password entry to confirm the profile password.
Privilege Type Click the drop-down menu to designate privilege authority for the user
entry:
Admin or User .
Apply Click Apply to create a new user account.
Item Description