SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
44
6. Enter the relevant WAN IP Settings, using the information provided in the table below.
The fields on this page are defined below.
Field Name
Description
Obtain an IP address
automatically
This option is selected by default. DHCP is enabled in MER mode. Click to prevent
the ISP automatically assigning the WAN IP to the gateway.
Option 60 Vendor ID
(
Optional
) Enter the vendor ID to broadcast so the DHCP server can accept the
device.
Option 61 IAID
(
Optional
) Enter the Interface Association Identifier (IAID). This is a unique
identifier for an IA, chosen by the client.
Option 61 DUID
(
Optional
) Enter the DHCP Unique Identifier (DUID) is used by the client to get an IP
address from the DHCP server.
Option 77 User ID
(
Optional
) Enter the user class ID that should be used to filter traffic.
Option 125
(
Optional
) Select whether local devices can automatically receive DHCP options
from the server. The default is
Disable
.
Option 50 Request IP Address
Enter the IP address to be used when sending messages. If the specified address is
not available, the DHCP server assigns the next allowed IP address.
Option 51 Request Leased Time
Enter the maximum lease time defined for the client. The default is
zero
(
0
).
Option 54 Request Server
Address
Enter the IP address of the source server.
Use the following Static IP
address
Click to manually declare the static IP information provided by your ISP. When you
select this option, you must enter the WAN IP address, subnet mask and gateway IP
address.
WAN IP Address
(
Available only when
Static IP address
is selected
) Enter the static WAN IPV4
Address.
WAN Subnet Mask
(
Available only when
Static IP address
is selected
) Enter the static Subnet Mask.
WAN gateway IP Address
(
Available only when
Static IP address
is selected
) Enter the static Gateway IP
address.
Advanced DMZ
Non DMZ IP Address:
The default is the address of the gateway.
Non DMZ Net Mask:
The default is 255.255.255.0.
IPv6 settings
section
The following fields appear when either
IPv6 Only
or
IPv4&IPv6 (Dual Stack)
is selected in the
Network Protocol
Selection
field on the WAN Service Configuration page.
Obtain an IPv6 address
automatically
This option is set to enabled by default and allows the ISP to automatically assign
the WAN IP address to the gateway. To disable the DHCPv6 Client on this WAN
interface, click the radio button.
