SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
97
Field Name
Description
Tunnel Mode
Select the encapsulation method to be used. Options are:
l
ESP
: Use this mode to encapsulate a packet with ESP and IP
headers. An ESP trailer is added to the packet for authentication
and integrity. This is the default.
l
AH
: Use this mode to encapsulate a packet with AH and IP
headers. For authentication, the entire packet is signed.
WAN Interface
Select the interface for the WAN service.
Remote Security Gateway
Enter the WAN IP address for the tunnel.
Anonymous
Click to enable anonymity protection on this connection.
LAN-side VPN
Select whether to allow access to the entire LAN or a single host for local IP
addresses. Options are:
l
Subnet
: Allows access to the entire LAN. Enter the IP address and
mask or prefix length for the VPN. You can also select the local
ID type. This is the default.
l
Single Address
: Allows access to a single host. Enter the IP
address for the host.
IP Address
Enter the IP address for local access.
Mask or Prefix Length
Enter the subnet mask or prefix length for IP address entered for local access,
e.g., 255.255.255.0.
Local ID Type
Select the type of ID for the local VPN. Options are
Default
,
Domain
, and
.
The default is
Default
. When you select
Domain
or
, the
ID Content
field
becomes available. Enter the ID.
Remote-side VPN
Select whether to allow access to the entire LAN or a single host for remote IP
addresses. Options are:
l
Subnet
: Allows access to the entire LAN. Enter the IP address and
mask or prefix length for the VPN. You can also select the remote
ID type. This is the default.
l
Single Address
: Allows access to a single host. Enter the IP
address for the host.
IP Address
Enter the IP address for remote access.
Mask or Prefix Length
Enter the subnet mask or prefix length for IP address entered for remote access,
e.g., 255.255.255.0.
Remote ID Type
Select the type of ID for the remote VPN. Options are
Default
,
Domain
, and
E-
. The default is
Default
. When you select
Domain
or
, the
ID Content
field becomes available. Enter the ID.
