SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
136
SNMP Agent
On this page, you can configure the SNMP (Simple Network Management Protocol) settings to retrieve statistics from the SNMP agent
for the gateway. You can enable or disable the SNMP agent and set parameters such as the read community, system name and trap
manager IP.
1. In the left navigation bar, click
Management
>
SNMP Agent
. The following page appears.
2. Modify the fields as needed, using the information provided in the table below.
3. Click
Save/Apply
to commit your changes.
The fields on this page are defined below.
Field Name
Description
SNMP Agent
This option is disabled by default. Click
Enable
to enable the SNMP agent.
Read Community
Select whether access to the network community is restricted. Options are
public
and
private
. The
default is
public
.
Set Community
Select whether access to the write (set) community is restricted. Options are
public
and
private
. The
default is
private
.
System Name
Enter the name of the system.
System Location
(
Optional
) Enter the location of the system.
System Contact
(
Optional
) Enter the contact for the system.
Trap Manager IP
(
Optional
) Enter the IP address where the trap manager is installed.
