SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
29
Field Name
Description
Default Queue Precedence
Enter the precedence of the specified group. The lower the value, the higher the priority. Options
are
1
-
8
. The default is
8
.
Default Queue Minimum Rate Enter the default minimum rate at which traffic can pass through the queue. Options are
1
-
0
Kbps.
The default is
-1
(no shaping).
Default Queue Shaping Rate
Enter the shaping rate for the specified queue. Options are
1
-
0
Kbps. The default is
-1
(no shaping).
Default Queue Shaping Burst
Rate
Enter the maximum rate at which traffic can pass through the queue. Options are
1600
bytes or
greater. The default is
3000
bytes.
ETH Interface
On this page, you can configure ETH WAN interfaces. One of the four LAN ports on your gateway can be re-purposed to become an
RJ45 WAN port when needed.
Notes:
l
Only one Ethernet WAN interface is allowed. If a WAN port it is already configured, you must remove it before you can
define a new one. Click the
Remove
checkbox and then click the
Remove
button. The
Add
button appears when the
existing port is removed.
l
If a WAN port is already configured and associated with a WAN service, you must remove the WAN service
configuration before you can remove the port on this page.
1. In the left navigation bar, click
Advanced Setup
>
Layer2 Interface
>
ETH Interface
. The following page appears.
2. If an interface is already defined, click the
Remove
checkbox and then click the
Remove
button.
3. Click
Add
.
4. Select the LAN port you want to use as a WAN port.
5. Click
Apply/Save
to commit your changes. The interface is added to the ETH WAN Interface Configuration page.
WAN Service
On this page, you can add, remove, or edit a WAN service. You must configure the related interface (ATM, ETH or PTM) first. You can
configure services for PPPoE, IPoE, and Bridging. A sample configuration scenario is provided for each variation.
