SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
17
Field Name
Description
L (# of bits in PMD Data
Frame)
Number of bits from the latency path included per PMD.
D (interleaver depth)
Interleaving depth in the current latency path.
Delay (msec)
PMS-TC delay in milliseconds of the current latency path (or the lowest latency path when running dual-
latency paths).
INP (DMT symbol)
Input level for DMT-managed DSL environments.
OH Frames
Number of xDSL OH Frames transmitted/received.
OH Frame Errors
Number of xDSL OH Frames transmitted/received with errors.
(End of DSL-specific field group)
Super Frames
Number of xDSL Super Frames transmitted/received.
Super Frame Errors
Number of xDSL Super Frames transmitted/received with errors.
RS Words
Number of Reed-Solomon-based Forward Error Correction (FEC) codewords transmitted/received.
RS Correctable Errors
Number of Reed-Solomon-based FEC codewords received with errors that have been corrected.
RS Uncorrectable Errors
Number of Reed-Solomon-based FEC codewords received with errors that were not correctable.
RS Codewords Received
(
Visible only for gateways connected via DSL
) Total number of Reed-Solomon Codewords received.
RS Codewords Corrected (
Visible only for gateways connected via DSL
) Total number of Reed-Solomon Codewords corrected.
RS Codewords
Uncorrected
(
Visible only for gateways connected via DSL
) Total number of Reed-Solomon Codewords Uncorrected
HEC Errors
Count of ATM HEC errors detected. As per ITU-T G.992.1 and G.992.3, a1-byte HEC is generated for each
ATM cell header. Error detection is implemented as defined in ITU-T I.432.1 with the exception that any
HEC error shall be considered as a multiple bit error, and therefore, HEC Error Correction is not
performed. [1],[2]
OCD Errors
Total number of Out-of-Cell Delineation errors. ATM Cell delineation is the process which allows
identification of the cell boundaries. The HEC field is used to achieve cell delineation. [4] An OCD Error is
counted when the cell delineation process transitions from the SYNC state to the HUNT state. [2]
LCD Errors
Total number of Loss of Cell Delineation errors. An LCD Error is counted when at least one OCD error is
present in each of four consecutive overhead channel periods and SEF (Severely Errored Frame) defect is
present. [2]
Total Cells
Total number of cells (OAM and Data cells) transmitted/received.
Data Cells
Total number of data cells transmitted/received.
Bit Errors
Total number of Idle Cell Bit Errors in the ATM Data Path. [3]
Total ES
Total number of Errored Seconds. This parameter is a count of 1-second intervals with one or more CRC-8
anomalies. [4]
Total SES
Total number of Severely Errored Seconds. An SES is declared if, during a 1-second interval, there are 18
or more CRC-8 anomalies in one or more of the received bearer channels, LOS (Loss of Signal) defects, SEF
(Severely Errored Frame) defects, or LPR (Loss of Power) defects. [4]
