SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
81
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are defined below.
Field Name
Description
IP Version
Select the IP version associated with the static route you wish to create. Options are
IPv4
and
IPv6
.
Destination IP address/prefix
length
Enter the destination network address / subnet mask for this route.
Interface
Select the WAN Interface for this route. This list is filtered by the selected IP version.
Gateway IP Address
Enter the next-hop IP address. If needed, include the /prefix length.
Metric
(
Optional
) Enter a number that is zero or higher.
Policy Routing
Policy routing makes somewhat automated routing choices based on policies defined by a network administrator. For example, a
network administrator might want to deviate from standard routing based on destination markers in the packet and, instead,
forward a packet based on the source address. Use this feature to establish similar policies.
1. In the left navigation bar, click
Advanced Setup
>
Routing
>
Policy Routing
and then click
Add
. The following page
appears.
