ADTRAN NetVanta 1748F Series, Hardware Installation Manual

Page: 40 / 42

Switch Management ADTRAN 1748F Switch
40 Copyright © 2016 ADTRAN, Inc. 61700558F1-34B
For a detailed description of connecting to the console and using the switch’s command line interface (CLI),
refer to the
DCSS Administrator’s Guide available online at https://supportforums.adtran.com .
Connecting to the USB Port
The USB port on the switch front panel is for transferring configuration files from a USB storage device to the
switch’s flash memory.
Figure 22. USB Port
Resetting the Switch
The reset button on the switch can be used to restart the device and set the configuration back to factory default
values. Use a long thin object, such as the end of a paper clip, to press the reset button. One push of the button
restarts the system software using default values.
Figure 23. Reset Button
USB Port
Reset Button