ADTRAN NetVanta 1748F Series, Hardware Installation Manual

Page: 18 / 42

Unit Installation ADTRAN 1748F Switch
18 Copyright © 2016 ADTRAN, Inc. 61700558F1-34B
2. UNIT INSTALLATION
The instructions and guidelines provided in this section cover hardware installation topics, such as mounting
options and supplying power to the unit. These instructions are presented as follows:
• Shipping Contents on page 18
• Rack Mounting on page 18
• Switch Cooling Requirements on page 20
• Replacing the Fan Tray on page 21
• Supplying Power to the Unit on page 22
Shipping Contents
Each ADTRAN 1748F Switch unit is shipped in its own cardboard shipping carton. Open each carton carefully,
and avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit,
immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Support page on
the ADTRAN website at http://www.adtran.com/support ).
Shipments of the ADTRAN 1748F Switch includes the following items:
• ADTRAN 1748F base unit
• Rack mounting kit containing two brackets and eight screws for attaching the brackets to the switch
• Grounding wire
• U.S. power cord
• Console cable (RJ-45 to DB-9)
• Quick Start Guide
Rack Mounting
The ADTRAN 1748F Switch is a1U-high, rack-mountable unit that can be installed into a 19-inch equipment
rack. The following steps guide you in mounting the ADTRAN into a rack.
Tools Required
Before you start to rack-mount the switch, be sure to have the following items available:
•
Four mounting screws for each device you plan to install in a rack—these are not included in the
shipment. Be sure to use the rack mounting screws that are supplied with the rack.
• A screwdriver (Phillips or flathead, depending on the type of screws used).
• To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
• Ethernet cables are intended for intrabuilding use only. Connecting an ADTRAN
unit directly to Ethernet cables that run outside the building in which the unit is
housed will void the user's warranty and could create a fire or shock hazard.