ADTRAN NetVanta 1748F Series, Hardware Installation Manual

Page: 19 / 42

ADTRAN 1748F Switch Unit Installation
61700558F1-34B Copyright © 2016 ADTRAN, Inc. 19
Figure 5. Attach Mounting Brackets
• Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic
discharge when handling this equipment.
• The ADTRAN 1748F is intended to be installed, maintained, and serviced by qualified
service personnel only and should be installed in a restricted access location as
described in UL/IEC 60950-1.
• If installed in a closed or multi-unit rack assembly, the operating ambient temperature
of the rack environment may be greater than room ambient temperature. Therefore,
consideration should be given to installing the equipment in an environment compatible
with the maximum ambient temperature specified by the manufacturer.
• Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
• Be careful not to compromise the stability of the equipment mounting rack when
installing this product.
• Consideration should be given to the connection of the equipment to the supply circuit
and the effect that overloading the circuit might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate ratings should be
used when addressing this concern.
• Reliable grounding of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the
branch circuit (e.g., use of power strips).