ADTRAN NetVanta 1748F Series, Hardware Installation Manual

Page: 15 / 42

ADTRAN 1748F Switch Introduction
61700558F1-34B Copyright © 2016 ADTRAN, Inc. 15
Rear Panel Features
Grounding Terminal
The grounding terminal must be connected to a ground source that provides local earth potential. Refer
to
Grounding the Chassis on page 23 for grounding instructions.
Fan Tray Module
The fan tray module provides air cooling for the switch system. For more information on the fan tray
module, refer to
Fan Tray Module on page 21 .
Power Supply Module Slots
The switch supports dual hot-swappable AC power supply units (PSUs). You can install up to two
PSUs with matching airflow direction in the switch. For more information on the switch power
supplies, how to install them, and how to power the switch, refer to
Power Supply Modules on page 22 .
Product Specifications
Ports
• 48 10 Gbps SFP+ transceiver slots
• 4 40 Gbps QSFP+ transceiver slots
• 1 10/100/1000 Mbps RJ-45 management port
Ports 1 through 48: SFP+
• 10 Gbps SFP+ transceivers: 10GBASE-LR, 10GBASE-SR
• 1 Gbps SFP transceivers: 1000BASE-SX, 1000BASE-LX
Ports 49 through 52: QSFP+
• 40 Gbps QSFP+ transceivers
Management Port
• 10/100/1000BASE-T, RJ-45 connector
Buffer Architecture
• 32 Mbit packet buffer
Aggregate Bandwidth
• 1280 Gbps
Switching Database
• 128K MAC address entries
Power Supply Module
• 100 to 240 VAC, 50 to 60 Hz, auto-sensing; hot pluggable
• 400 Watts at 240 V/100 V per module
Power Consumption
• 165 Watts maximum
Out-of-Band Management
• RS-232 RJ-45 console port
In-Band Management
• SSH, Telnet, or SNMP
Software Loading
• FTP/TFTP in-band