C N C 4 2 2 0 M a c hi ne Too l Op e ra t ion an d Te st
12
1.5.1
POSITION INTERFACE
Press the position key
to enter the position interface,
which consists of absolute, relative,
comprehensive and position/program pages. You can press the Up/Down key
to
view.
Absolute coordinates
The X coordinate and Z coordinate are the absolute position of the knife in current work piece
coordinates system, which is specified by G50.
Fig. 1-3-1
Programming speed: the speed specified by F code in the program (unit: mm/min).
Actual speed: the actual processing speed (unit: mm/min) after the magnification has been adjusted
in the actual processing.
Feeding magnification: the current feeding magnification
Quick magnification: the current quick magnification
G function code: current valid G code processing pieces in Group 01 and 03: when the program has
executed M30, the processing pieces are increased by 1.
Cutting time: the cumulative time when the program and MDI are running; the time format is: Hour:
Minute: Second. The cutting time is 0 when the system is electrified.
T: current tool number
S: current main axis rotation speed
Note: The main axis encoder is necessary to display the actual rotation of the main axis.
Relative coordinates
The U coordinate and W coordinate, which are 0 when the system is electrified, are the
relative coordinates of current position relative to the reference point. In manual mode, press the
letter key
or
, and the U or W flashes in the page; press the Cancel key
to
reset the U or W coordinate.
Setting
s
Settings
interface
Parameter switch
Graph
interface
Graph parameters
File manager
Graph display
Program
Program
interface
MDI
Program display
Program directory
Position
Position
interface
Comprehensive coordinates
Position/program
Relative position
Absolute position
Knife
compe
nsation
Knife bias
interface
Knife
alignment
value
interface
Knife bias interface
Macro variable display
Diagnosis
Diagnosis
interface
Output point state
Handheld box and main axis
encoder test
Keypad test
Input point state
Alarm info display
Current position (absolute coordinates)
Manual rate: G code:
Actual rate:
Processing pieces:
Manual magnification: Cutting time:
Main axis magnification:
Manual mode