Adp Series 4000, Installation Manual

Page: 11 / 64

Unpacking and Inspecting the Timeclock
Series 4000 Badge Timeclock Installation Guide 1-3
* If you are located outside of the United States and Canada, your Series 4000 timeclock does not
include a power cord in the box. You must order an International Kit separately that contains the
appropriate power cord for use in your country.
A mounting template is also included to help you mark the position of the
timeclock.
Note
If you ordered either of the option kits (backup battery, internal AC outlet), they
are sent to you packaged separately in their own boxes, and with their own
installation instructions.
Number Part
1 Cover assembly, including an integral bar code reader
2 Base of the timeclock and hinge
3 Power cord strain relief clip, with two screws and two nuts (packed
with other accessories in a plastic bag)
4 Security wrench, three pointed mounting screws, three anchors, and
two flat screws (not pointed)
5 Transformer
6 Plate and two nuts to convert square cable access opening in the
timeclock to a round opening (packed with other accessories in a
plastic bag)
7 Two power cords: 6 ft. (182.88 cm) to plug the timeclock into an
external AC outlet; 12 in. (30.48 cm) to plug in a timeclock mounted
over an AC outlet*
8 One supervisor badge, one maintenance badge (packed with other
accessories in a plastic bag)