Adobe CAPTIVATE 2, Use Manual

Page: 28 / 306

28 Chapter 2: Exploring the Workspace
Undoing and redoing actions
You can reverse the previous action by using the Undo command. You can also reverse the action
of the Undo command by using the Redo command.
To undo an action:
•
From the Edit menu, select Undo or press Z.
Each click reverses one more action. Continue clicking Undo (or pressing Z) to
remove as many of the previous changes as necessary.
Tip: When the Undo command is unavailable (dimmed), you cannot undo the previous action.
Tip: Adobe Captivate tracks actions from the time you open a project until the time you close the
project. Therefore, you can undo as many times as you need to, as long as the project remains open.
To redo an action:
•
After you have used the Undo command, from the Edit menu, select Redo or press Y.
Changing capture keys
Adobe Captivate has default keys for starting and ending the recording process (both standard
Flash recording and full motion recording). You can change these keys as you like.
Note: You cannot use the Escape, Enter, Tab, Spacebar, Shift (without Control or Alt), F1, or
Backspace key in a key combination.
To change recording capture keys:
1.
Do one of the following:
■
Open Adobe Captivate. From the Options menu, select Recording Options.
■
Open an Adobe Captivate project. From the Options menu, select Recording Options.
2.
Click the Change Recording Keys tab.
3.
To change keys, click once in one of text boxes and, on the keyboard, press the key or key
combination you want to use. For example, click inside the stop recording text box and then
press Shift+Alt+4. The key combination you entered now appears in the stop recording text box.
You can use almost any key, including the Control, Alt, Shift+Control, and Shift+Alt keys. For
example, you could change the stop recording key to Alt+R.
4.
When you finish, click OK.