66
Chapter 10
: Roadway
To open roadway program, follow ‘Menu
→
4, Prog.
→
7, Roadway’
Roadway function is divided into two parts: Design Roadway and Stake-out
Roadway. You may stake out designed points according to the stake and deviation of
the Designed Roadway. The menu of roadway is as followed:
Road
1.Open shape file
2.Re-define(H)
3.Re-define(V)
4.Resume H curve
5.Resume V curve
6.Stake out(road)
If you have already imported [.LS] files into the instrument from the external
device, you may open the [.LS] file through ‘1.Open Shape file’. You can choose
any of the three options after opening the LS file: ‘Stake-out roadway’, ‘Resume H
curve’ or ‘Resume V curve.’
10.1.
Inputting Roadway
Roadway design requires to input horizontal alignment and vertical
alignment. The input will be saved to [. LS] files. The maximum number for
elements is 21 in each file and the number of intersections cannot be greater than 7.
10.1.1.
Horizontal alignment
An input for roadway design.
The element method
Enter this function by pressing ‘Re-Define (H)’ and ‘Resume H curve’ under
Roadway menu.
Enter ‘Define (H)’ dialog:
If it’s the first time you select ‘I.P’ (input intersection point), then the method
to input will be I.P afterwards. The first point inputted is ‘Define (H)- Begin’. Press
Summary of Contents for Total Station ATS-120 Series
Page 1: ......
