17
2.2.4.
Explanation of Saving of data
If this is your first time using the device, a dialog box (With text: Select File)
will appear on the screen. This is a good chance for you to select all files that the
Instrument will use. When finishing a single measurement or a repeated measurement
under each mode, a dialog box (With text: Information) will pop up and ask you to
save the point measured. You can rename and code the points, or set a target height.
The ‘
ENT’
key will save the coordinates into measurement files. The [
★
] key will
save the coordinates in both the
measurement and coordinate files
. If you choose not
to edit points, the points will be saved with the current name, elevation and code.
2.3.
Star (
★
) Key Mode
Under the distance measurement interface, pressing the key [
★
] (star key) will
lead to a page as shown below.
Settings from the star key (
★
) are as followed:
•
Adjust the contrast by pressing ‘
▲
’ and ‘
▼
’.
•
Adjust the background light of the screen with ‘
◄
’ and ‘
►
’.
•
Turn on or off the background light of the screen by pressing Key ‘F1’.
•
Turn on or off the display of compensation by pressing ‘F2’.
•
Adjust reflector by pressing ‘
►
’. Each time pressing the key ‘
►
’, the reflectance
target is switched between prism (Prism), Non-prism (NP) and reflector board (RB).
•
Pressing key ‘F3’ to switch on or off the visible laser beams.
•
Pressing the key ‘F4’ to select ‘parameters’, you can set settings of Prism, PPM
value, temperature and pressure.
Summary of Contents for Total Station ATS-120 Series
Page 1: ......
