AdirPro Total Station ATS-120 Series, Manual

Page: 13 / 84

12
the measuring interface.
Displays the dialog of the
contrast, lighting,
compensator , parameters of
distance measuring and file
selecting.
Symbols on the Display
Symbol Indication
Vz Zenith Mode
V0 The mode that the vertical is displayed as zero when the
telescope is level in normal .
Vh Vertical angle Mode (it is 0°00
′
00
″
when the telescope is
level. The angle of elevation is positive and the angle of
depression is negative.)
V% Slope Mode
HR Horizontal angle (right angle). dHR meas the angle
difference of setting out.
HL Horizontal angle (counter clockwise increment)
HD Horizontal distance. dHD is to stake out horizontal
distance difference.
VD Elevation difference. dVD is to stake out difference
between elevation differences.
SD Slope distance. dSD is to stake out differences between
slope distances.
N North coordinate. dN is to stake out differences between
north-coordinates.
E East coordinate. dE is to stake out differences between
East-coordinates.
Z Elevation coordinate. dZ is to stake out differences
between Z-coordinates
EDM(Electronic Distance Measurement) is in progress.
m Unit in meters (metric units)
ft Units in feet
fi Units in feet and inches. Figures on the left of
decimals represent feet and those on the right
represents feet in percentile.
X The magnitude of which is along the baseline in a
point projection measurement. The positive direction
is from the starting point to the terminal.
Y The magnitude of which deviates from the base line
horizontally in a point projection measurement.
Z
Altitude of the target in a point projection measurement.