27
4.6. Entering letters and numbers
You can enter the letters and numbers directly, because our total station is
equipped with a keyboard.
The page for ‘Setup Station’
(M
enu→1
, Surveying
→2
, Station
→
Soft key F1[input]) can involve entering
letters and numbers. Assume that the point. name is ‘SUN1A’ and STN is ‘ -
123.456’
The black box indicates that this column of information is selected and
numbers and letters will be entered into this column only. Press soft key
‘Num.’ (F3) to switch between Numbers and Alphabet.
•
Press key ‘7’for once, displaying ‘S’ in the column
•
Stop the operation for at least 0.4 seconds
•
Press key ‘7’for once again, displaying ‘ST’ in the column
•
Press key ‘7’ for the third time, displaying ‘SU’ in the column.
The interval of pressing the key “7” twice is not over 0.4 seconds. If
over, you can use the key “
▲
”or “
▼
”to correct it. Press key ‘5’ displaying
‘SUN’ in the column as follow as
•
Press soft key ‘Alph’ (F3) to switch between letters and
numbers.
•
Press key ‘1’ displaying ‘SUN1’ in the column
Summary of Contents for Total Station ATS-120 Series
Page 1: ......
