45
9.1.6.
Config of Surveying
Use ‘
◀▶
’ to select Sequence
You
can choose the ‘survey first’ or the ‘edit first’ under
surveying mode.
Check the same name of point
you may choose to check or not to check if there is a duplicate of name in the
list.
If choose to check, the instrument will first search for the
duplicated name in the file when saving the point. If a duplicated name is found, a
box of ‘duplicated name found’ will appear on the screen. Press ‘ENT’ to overlay or
‘ESC’ to quit and go back to the previous page.
If you choose not to check, the instrument will directly save the coordinate of
the point.
Edit point
You may choose it if needed to edit the information of points when auto saving
after measurement. If choose to edit ‘manually’, then the system will enter the
‘Information’ page when pressing the soft key ‘Save’. If choose to edit ‘Auto’, then
the system will save the measurement automatically with point name added by one.
Record
It indicates whether to display the coordinate by sequence ‘NEZ’
or ‘ENZ’ when surveying.
9.2.
Staking out
Staking out is a way to find the earth point of the designing point. The required
process of staking out is as follows:
1.
You may select files for staking out. The files may contain the coordinates of
the station (STA), back sight (BBS) and the stakeout point etc.
2.
Setup station(STA).
3.
Setup back sight (BBS) to determine azimuth.
4.
Input the coordinates of stakeout point, then start to stake out.
The Menu for staking out is as follows:
The ‘Setup Station’ and ‘Orientation (BBS)’ are the preparation works for
staking out. If you have already setup station and orientation of ‘BBS’, re-setting
them are not necessary.
Summary of Contents for Total Station ATS-120 Series
Page 1: ......
