adept technology GadgetGateway, User Manual

Page: 71 / 124

4-25
GadgetGateway Serial Interface 4.9709.1 Parameter Menu
[0] Subnet number : 0
[1] Node number : 0
[2] Domain : <NOT SET>
Domain Length : 255
[3] Subnet Forward Table
[4] Group Forward Table
[5] Subnet number : 0
[6] Node number : 0
[7] Domain : <NOT SET>
Domain Length : 255
[8] Subnet Forward Table
[9] Group Forward Table
[S] NodeState : UnConfigured
Node ID : 02 61 61 61 61 61 (HEX)
[#] Change Value
[P] Previous Menu
>>>
The management of these parameters is usually performed by a management tool such as
Echelon's LonMaker
TM
. If you are using a management tool, it is recommended that these
parameters not be changed manually. However, the Interface Menu does allow users to
change the interface parameters manually, if desired.
Note: Changing parameters in the Interface Menu does not satisfy all of the requirements
of configuring the ANSI/EIA 709.1 interface. The feature of configuring the 709.1 inter-
face without the use of a management tool is under consideration for future releases.
4.9.36 Change Subnet Number
Select [0] or [5] from the menu and press ENTER.
Enter New Subnet Number >>>
Enter the new subnet number and press ENTER. The new value will appear in the menu.
Hit Enter without typing a number to return without changing the subnet number.
4.9.37 Change Node Number
Select [1] or [6] from the menu and press ENTER.
Enter New Node Number >>>
Enter the new node number and press ENTER. The new value will appear in the menu. Hit
Enter without typing a number to return without changing the subnet number.