adept technology GadgetGateway, User Manual

Page: 35 / 124

3-9
GadgetGateway Startup Guide 3.6Using GadgetGateway with LonMaker
over IP
6. The GadgetGateway now must be installed and commissioned from within the Lon-
Maker software. To do this, create a new TP-10 channel in the LonMaker Visio screen.
Drag a router device into the network and uncheck the “Commission Device” box. Set
up the router to communicate between the IP channel and the TP-10 channel. Once the
device has been set up, right-click the device and select “Commission.” Choose the
“Service Pin Install” option. When the LonMaker indicates that it is waiting for the ser-
vice pin, press Service Pin 2 on the GadgetGateway. If the GadgetGateway and the
LonMaker computer are communicating properly, LonMaker will commission the
GadgetGateway, and the router device will turn green in the LonMaker application. The
following screen shots show how this is done.
FIGURE 3.2 LonMaker drawing prior to dragging new router shape for GadgetGateway.