LTPS-UM-8007-01, Issue 1
Installation
SPX-CABFIN01, SPX-CABFIN04
November 9, 2001
13
Figure 8.
Sling Inserted in Eyebolts
8
Remove the anchor bolts and washers from the foundation pad.
9
Lift the cabinet, and lower it into position over the anchor bolts. The cabinet should rest evenly on the
foundation pad and be supported at each corner.
10
Set the cabinet and slacken the slings so that the full weight of the cabinet is on the base.
11
Install the four anchor bolts, flat washers, and lock washers. Tighten all bolts.
12
Remove the slings and tagline. Remove the lifting eyebolts, and insert the nylon hex-head bolts and washers
provided in the cabinet loose parts package.
The cabinet must be lowered onto the foundation pad parallel with the pad surface, in alignment
with the anchor bolts, and clear of the conduits in the foundation pad.
Minimum sling
length = 8 feet
Cabinet
Tagline
