LTPS-UM-8007-01, Issue 1
Product Overview
SPX-CABFIN01, SPX-CABFIN04
November 9, 2001
1
P
RODUCT
O
VERVIEW
Figure 1.
SPX-Fiber Hub Cabinet with Pedestal-Type Power Transfer Switch P252-889
The Soneplex
®
Fiber Hub Cabinet (SPX-CABFIN) shown in
is designed to house a variety of electronic
equipment for the telecommunications industry. The cabinet provides a sealed internal environment with a heat
exchanger cooling system; outside cooling air and humidity are totally isolated from the electronic equipment.
F
EATURES
The SPX-CABFIN cabinet features:
•
an aluminum cabinet measuring 45 inches (1.14m) wide, 46 inches (1.17m) deep, and 71.25 inches (1.82m)
high.
•
a main electronics chamber with a heat exchanger cooling system.
•
a bulk power system and a side entrance splicing-end or power-end chamber.
•
a slide-out battery drawer at the cabinet base.
The drawer is factory-equipped with a heater that is turned on automatically when the ambient temperature
decreases to 40°F (4°C), and remains on until the temperature increases to 60°F (16°C).
•
a splicing and power end chamber with a 60 ampere-rated power load center for 120/240 Vac, 60 Hz,
single-phase power, and 325-type protection blocks for copper distribution pairs.
•
accommodations for up to four 3-inch O.D. outside plant cables.
•
one grommeted opening for grounding, and one 2-inch inside diameter conduit opening for connection to
local AC power in the splicing/power end chamber.
•
secured access doors and intrusion alarm switches.
Self-locking wind latches hold the doors securely open during maintenance.
