ADB Safegate RELIANCE IQ L-852G(L), User Manual

Page: 43 / 52

3. Connect the LED-cable(s) to the LED-board(s), note the cable orientation, see Figure 28 .
Figure 28: LED board
4. Assemble the light fixture.
Special case for three prism light fixtures
There are two different types of LED boards present in all three prism light fixtures. These might be two completely different
LED boards, for example two green and one red LED board, but they can also look the same. Unidirectional three prism light
fixtures have two types of LED boards that look the same, one that is supposed to be connected with a standard LED cable
and two that are supposed to be connected in pair using a split LED cable. It is of high importance to keep track of which LED
boards are which even if they look like there the same. This because the light fixture will not function properly if the LED
boards are installed incorrectly. The type of LED board that there are two of should be connected together using the special
split-cable.
The two LED-boards connected using a split-cable should be placed on the sides in the light fixture and the one using a
standard single cable placed in the middle.
Connect the split LED cable to LED channel B on the converter and the standard LED cable to LED channel A on the converter.
UM-0197, Rev. 1.0, 2019/11/19 37
Copyright
©
ADB Safegate, All Rights Reserved