ADASH Ltd.
Adash 4300 – VA3Pro
For further technical and contact information visit www.adash.com, email: [email protected]
15
TRIG input
1 – GROUND
2 – GROUND
3 – GROUND
4 – +5 V OUTPUT / 100mA for the tacho power supply
5 – TRIG INPUT - for tacho signal
Standard cable specifications
Sensor signal – pin number 1
Ground – pin number 2
When you use the standard cable:
In the IN1 socket - the signal is measured on CH1.
In the IN2 socket - the signal is measured on CH2.
If you want to use the tri-axial sensor, then you should use the IN2 socket (pins 3,1,5) + ground (pin 2). You
need a special cable for this purpose.