Adash 4300 VA3Pro User Manual Download Page 28 | Manualshive

Page: 28 / 68

background image

ADASH Ltd.

Adash 4300 – VA3Pro

For further technical and contact information visit www.adash.com, email: [email protected]

28

Measurement

Press Start to initiate the measurement. The speed detection runs first (see chapter Speed Detection).

Status bar

There is a Status bar at the top part of the display. It provides information about the settings and status of the
measurement. If the measurement is running there is a red icon labeled meas flashing in the top right corner.

Ch1:

The number of the channel being used

1140 RPM Auto:

the value and unit of speed and the method of speed detection

Auto: the speed is detected from the frequency spectrum

Manual: the speed is entered manually by the user

Tacho: the speed is detected by the tacho

Alarms:

The standards used for stating the limit values

Measurement screens

You can switch between the measurement screens with the left and right arrow buttons.

Overall (RMS) and Peak (0-P) values

Measurement of Overall and Peak value in the following frequency bands:
velocity: 10 Hz - 1000 Hz
acceleration: 0.5 kHz – 25.6 kHz
The colour describing the condition of the machine (green, yellow, red) is determined according to the speed
value and vibration value (RMS, Peak).

Spectrum up to 200Hz – mechanical looseness detection

FFT analysis of vibrations in the range 2 Hz - 200 Hz in mm/s RMS
The 3 maximum peaks found are displayed
The peaks are arranged according to the vibration amplitude.

«
...
26
27
28
29
30
...
»

Summary of Contents for 4300 VA3Pro





































































Reviews:

No comments

Related manuals for 4300 VA3Pro

Brand: Kane Pages: 19

Brand: Xylem Pages: 24

Brand: Rayjet Pages: 81

Brand: Abus Pages: 168

Brand: OHAUS Pages: 76

Brand: ColorLite Pages: 68

Brand: Teradek Pages: 16

Brand: PCB Piezotronics Pages: 16

fieldscout TDR 100

Brand: Spectrum Techniques Pages: 20

OPTIFLUX 4040 C Series

Brand: KROHNE Pages: 20

Brand: Kane Pages: 52

Brand: Novus Pages: 52

Brand: Rockler Pages: 4

Brand: DeFelsko Pages: 25

Lange ORBISPHERE 3100

Brand: Hach Pages: 47

Brand: Zensol Pages: 12

Brand: Mahr Pages: 14

Brand: Readiness Systems Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands