ADASH Ltd.
Adash 4300 – VA3Pro
For further technical and contact information visit www.adash.com, email: [email protected]
20
Tacho Trig Level
The correct reference value has to be set for speed measurement. E.g. when the
standard tacho level is 0.5V and the pulses reach the 1.5V, then the value 1V should be correct. The negative
pulses are not allowed, you need to use the Adash converter for them.
Pulses per rotation
This value has to be set for correct speed evaluation, when more pulses are generated
during one rotation. The Trigger Source=tacho is not available for more then one pulse.
Global
The parameters which have effect on all or many functions are understood as Global parameters.
Press the Menu on the main screen and select Global. Press the OK button.
Route Autosave
off, on automatically saves the data after reading is taken (in route mode)
Check Sensors
yes, no checks the difference of sensor settings (point in route vs. instrument) when the
point (or set) is opened,
if the difference is found the warning window appears
Push the Ignore button (F1) to continue without change.
Push the Rewrite button (F3) to rewrite sensor settings in the instrument by the Point.
Language
ENG, CZE
Units
metric, imperial
Speed unit
Hz, RPM, CPS, CPM
Frequency unit
Hz, RPM, CPS, CPM
Phase Range
-180,180
0, 360
