ADASH Ltd.
Adash 4300 – VA3Pro
For further technical and contact information visit www.adash.com, email: [email protected]
51
RUN 2 - the RESULT screen
The weight and phase(position) of the final balancing mass are displayed. Mount the final mass. The angle is
applied from the trial mass position, which represents the 0 (zero) degrees. The direction of the angle is the
same as the direction of rotation. E.g. +57 degrees means from the trial mass position in the direction of
rotation. Minus degrees means against the direction of rotation.
If the number of blades was defined, the final mass is divided between the two nearest blades to the exact
balancing angle. The angle position is always measured from the position of the trial mass.
The RUN 3 screen
When the mass or masses are mounted then it is the time to check the balancing job. The screen is very similar
to the RUN 1 screen.
Take the reading or manually enter the values.
