manualshive.com logo in svg

Ada Cinema Rhapsody, Operation & Installation Manual, Page: 41 / 69

Share
Download
Ada Cinema Rhapsody Operation & Installation Manual Download Page 41

Page 38

Auto Mode On/Off

The AUTOMODE function is a setting rather than a decoding mode.
This setting is intended to permit the Cinema Rhapsody to automati-
cally switch between 5.1 (AC-3 or DTS) decoding modes or a two
channel mode  depending on the software in play.  The AUTOMODE
function will allow you to flip between AC-3 laser discs (via the laser
disc player’s internal RF Demodulator), DTS and 2 channel PCM
lasers & CDs, and DTS or AC-3 DVDs.
To turn the AUTOMODE ON or OFF:

1

Turn the INPUT knob to the device (capable of playing AC-3

software) you wish to alter and press the INPUT knob.

2

Turn the MODE knob clockwise until the display reads

AUTOMODE ON or AUTOMODE OFF.

3

Press the MODE knob to switch ON to OFF or OFF to ON.

The Cinema Rhapsody’s “Out Of The Box” Setup has the LASER/
DVD 1 and LASERDISC 2 Input Labels set to AUTOMODE ON.  All
other Input Labels are set to OFF.  If you are using a DVD player on
the DVD PLAYER 3 Input Label and you plan to also play standard
CDs, you may wish to set the DVD PLAYER Input Label to
AUTOMODE ON.

For components that are not
set to auto-mode on, the
Cinema Rhapsody’s default
mode for this input will return
after re-selecting the input or
during a restart, even if you
alter the mode.

For example, if your CD player
is set for Quad Bypass as its
Default Mode but for this one
CD, you wish to listen to it in
Stereo, turn the mode knob to
Stereo.  If you change inputs
or turn the system off, the
next time you access your CD
player, it will default to the
Quad Bypass mode.

Summary of Contents for Cinema Rhapsody






































































Reviews:

No comments