Page 34
3
Turn the CHANNEL knob clockwise one click until the dis-
play reads NOISE RIGHT and then press the CHANNEL
knob. Raise (clockwise) or lower (counter clockwise) the
right channel’s pink noise level to approximately 75 dB
and then press the CHANNEL knob.
4
Turn the CHANNEL knob clockwise one click until the dis-
play reads NOISE R SURR and then press the CHAN-
NEL knob. Raise (clockwise) or lower (counter clockwise)
the right surround channel’s pink noise level to approxi-
mately 75 dB and then press the CHANNEL knob.
5
Turn the CHANNEL knob clockwise one click until the dis-
play reads NOISE L SURR and then press the CHANNEL
knob. Raise (clockwise) or lower (counter clockwise) the
left surround channel’s pink noise level to approximately
75 dB and then press the CHANNEL knob.
6
Turn the CHANNEL knob clockwise one click until the dis-
play reads NOISE L/R SR and then press the CHANNEL
knob. Raise (clockwise) or lower (counter clockwise) both
surround channel’s pink noise level to approximately 75
dB and then press the CHANNEL knob.
7
Turn the CHANNEL knob clockwise one click until the dis-
play reads NOISE SUB and then press the CHANNEL
knob. Raise (clockwise) or lower (counter clockwise) the
subwoofer channel’s pink noise level to approximately 75
dB and then press the CHANNEL knob.
At this time you have calibrated the pink noise to THX specifica-
tions.
8
Without adjusting either an individual channel’s level turn the
Master Volume control one click to exit the Noise Test.
The Cinema Rhapsody will now return the Master Vol-
ume to the approximate level, prior to entering the Noise
Test mode. Please note, that the relative balance be-
tween the channels, set during Noise Test, are preserved.
9
Engage a source into play and turn the Master Volume knob
to a comfortable listening level.
10 To save the calibrated levels, turn the CHANNEL knob to
VOL RECALL 1. Press and Hold the CHANNEL knob
until the display flashes VOL STORED 1.
Audio Setup - Continued
As you proceed to go through
pink noise sweeps, the only
knob you will need to work is
the Cinema Rhapsody’s
Channel knob. This knob not
only selects noise modes but
also noise channels and then
the adjustment of the
channels. Jumping to the
master Volume control will
take you out of the noise
mode.