manualshive.com logo in svg

Ada Cinema Rhapsody, Operation & Installation Manual, Page: 2 / 69

Share
Download
Ada Cinema Rhapsody Operation & Installation Manual Download Page 2

Contents

Safety Instructions & Electrical Warning ..................................................... 1

AC Connections ............................................................................................. 2

Power Amplifier (& Powered Subwoofer) Connections ......................... 3

Introduction - Front Panel Controls & Displays .......................................... 4

Power On, Mute, Off, & Master Volume Control ..................................... 5

Input Selection - Dialing in the desired component. .............................. 6

Mode Indicators & How They Function ................................................... 7

Mode Selection & Dolby Digital Mode Descriptions .............................. 8

Dolby Digital Modes (AC-3) ...................................................................... 8

Dolby Digital Modes (AC-3) - cont. ........................................................... 9

DTS Modes ............................................................................................... 10

Pro Logic & Auto Modes ......................................................................... 11

Stereo, Phantom, & Music Modes .......................................................... 12

3 Channel, Quad, Stereo Enhance, and Mono Enhance ...................... 13

Record Selector ....................................................................................... 14

Rear Panel Inputs & Outputs .................................................................. 15

Out Of The Box Setup .................................................................................. 16

Laser Disc or Combination Laser Disc/DVD Player ............................. 18

Laser Disc Player without a Digital Output (or 2nd Laser) .................. 20

DVD Player ............................................................................................... 22

VCR ........................................................................................................... 24

DSS or Satellite Receiver ........................................................................ 25

Cable or TV Tuner .................................................................................... 26

CD Player .................................................................................................. 27

Tuner ......................................................................................................... 28

Cassette .................................................................................................... 29

Auxiliary Input.......................................................................................... 30

Record Output Connections ................................................................... 31

Connection To Your TV, Projector, or Line-Doubler ............................. 32

 Audio Setup ................................................................................................. 33

Summary of Contents for Cinema Rhapsody






































































Reviews:

No comments