manualshive.com logo in svg

Ada Cinema Rhapsody, Operation & Installation Manual, Page: 15 / 69

Share
Download
Ada Cinema Rhapsody Operation & Installation Manual Download Page 15

Page 12

LASER/DVD   1

PHANTOM PLUS

LASER/DVD   1

PHANTOM ENH

LASER/DVD   1

PHANTOM REEQ

LASER/DVD   1

STEREO RE-EQ

Stereo, Phantom, & Music Modes

STEREO Mode
This mode offers two-channel
stereo playback with the sub-
woofer active.  The Subwoofer
can also be deactivated.

STEREO RE-EQ Mode
This mode provides two-
channel stereo playback with
THX Re-Equalization.

PHANTOM Mode
This mode redirects the center
channel information to the
front right and left speakers
and is used when no center
channel speaker is used.

PHANTOM ENH Mode
This Phantom mode engages
THX Enhancements.

PHANTOM RE-EQ Mode
This Phantom mode only
engages THX RE-EQ.

PHANTOM PLUS Mode
This Phantom mode provides
full range audio to the
surround channels..

MUSIC Mode
This mode can be used for
music playback as it provides
some level of steering
encoded sound tracks.

MUSIC PLUS Mode
This mode adds decorrelation
to the surround channels of
the standard MUSIC Mode.

LASER/DVD   1

STEREO

LASER/DVD   1

PHANTOM

LASER/DVD   1

MUSIC

LASER/DVD   1

MUSIC PLUS

Stereo Mode- The Stereo mode
engages only the front right and
left speakers.  The audio path pro-
vides for stereo separation.  The
subwoofer is also active providing
that the subwoofer is active in the
Bass Management setting found
in the Pro Setup menu.

Stereo RE-EQ -This mode will add
THX RE-EQ to the stereo chan-
nels.  This is not a full THX mode.
This mode should be used when
watching older stereo movies.

The Phantom Mode - This mode
takes the center channels informa-
tion and combines it with the sig-
nal front right and left channels.
This mode is ideal for systems not
incorporating a center channel.

Phantom ENH Mode - Phantom
Enhance Mode provides the same
surround sound decoding as the
Phantom mode but with full THX
Enhancements.

Phantom RE-EQ - This mode pro-
vides the same redirection of the
center channel information as the
Phantom mode.  This mode also
adds THX RE-EQ to the surround
sound mix.

Phantom Plus Mode - Phantom
Plus Mode will divert the center
channel information while provid-
ing decorrelation to the surround
channels.

Music Mode - This mode enables
some level of decoding, thus pass-
ing audio to all speaker channels.
Sounding like Dolby Pro Logic, this
mode does not engage any noise
reduction, resulting in a sound that
delivers additional highs.

Music Plus Mode - The Music
Plus mode in addition to Music
Mode also provides decorrelation
to the surround channels.

Summary of Contents for Cinema Rhapsody






































































Reviews:

No comments