Rev. 1
HEXAPAD 10 BC USB
8.5.4.9 gen2session - EPC Gen2 tag section
Command
gen2session value
Function
Check (no value) or change the "Session" parameter of the Gen2 pattern.
Description
It is the type of session in which the reader will read a tag.
Pattern
s1
Values
s0
s1
s2
s3
Notes
The combination of gen2session and gen2target values reflects the read repetition rate of
the same tag.
Example
To check the Session value:
gen2session<CR>
s1<CR>
To change the session value to s0:
s0<CR gen2session>
ok - parameter has been changed.<CR>
Errors
When the value reported is not among the specified:
error - value out of range<CR>
When more than one value is passed to the command:
error - too many args.<CR>
NOTE:
Use
gen2session and
gen2target to
manipulate the read rate of the same
tag, as described in
8.5 Read rate of the same tag
.
Summary of Contents for HEXAPAD 10
