ASSEMBLY
PRIOR TO ASSEMBLY:
1. The Health Bounce Pod™ / BPod™ must be placed on a level surface.
2. Adequate overhead and horizontal clearance of objects and any possible hazards must be
maintained.
3. Verify that there is absolutely no obstruction underneath the Health Bounce Pod™ / BPod™
unit.
4. It is recommended to use gloves to protect your hands during assembly.
Remove unit from box. Do not cut any of
the plastic ties that hold the arches and
support arms in place.
Place unit on floor so that springs face up.
Cut the plastic ties that hold the C-hoop
and Styrofoam packaging material in
place and remove the C-hoop.
Note that there are eight (8) nuts that hold
the arches & support arms in place.
These will be removed and discarded one
at a time in Step 2.
While holding the anchor bolt in place
with your index finger, remove one
corresponding nut with the wrench.
Continue to hold the bolt in place. Keep
the nuts for future transport.
Screw one short leg onto the anchor bolt
while holding the bolt in place.
Do not fully tighten short legs until
Step 12. Attach remaining 7 short legs.
Step 1
Step 2
3
Summary of Contents for BPOD
Page 32: ......
