VSBC-6862
Rev 1.43
8
1.2. Features
This board has been designed to integrate the most required functions, including several Fast
Ethernet ports, communication ports, and the flexibility of four IP modules slots for easy user's
customization.
•
Designed with Motorola PowerQUICC II processor
•
A 32-bit EC603 ™ processor core rated at 280.0 MIPS at
200 MHz (Dhrystone 2.1)
•
Dedicated 32-bit RISC processor for communication
protocol handling (CPM)
•
Up to 128 MByte of SDRAM memory with burst
capabilities, 64 bit data bus width
•
8 or 16 MByte of Flash memory for non-volatile
information, divided on two bootables banks, one bank
dual-port with the VME bus
•
1 MByte of SRAM memory dual-port with the VME bus
Non-volatile operation through the VME stand-by signal
•
A separate real time clock device with 32 kByte of battery
backed-up SRAM
Dual-port with the VME bus
•
8 kbit I
2
C EEPROM for board and user configuration
•
Two Fast Ethernet 100Base-TX/10Base-T interfaces with
auto-negotiation capability
•
Four HDLC serial ports selectable between RS-232 /
RS-422 / RS-485 or V.35
•
Two RS-232 serial ports
•
I
2
C bus for local extensions
•
JTAG port for debug
•
VME master, slave, system controller interface
•
Four IP Modules slots, compatible with the
ANSI/VITA-4 1995 specification, support for 8 MHz
clock with DMA capabilities
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
