![background image](http://html.mh-extra.com/html/acti/network-video-recorder/network-video-recorder_user-manual_2842787057.webp)
www.acti.com
NVR 2.2 SP3 (V2.2.57) User’s Manual
57
Fig. 31 Camera Setup
– Motion - Motion Setup
After you click the Motion Setup button, the
„Apply‟ button will show up and replace „Motion
Setup
‟. Then you can start to configure motion (and PIR) detection
1.
Get Motion Setting
: Click this button to connect to retrieve motion detection setting from
the device and see live view.
2.
Apply button:
Click this button to save the settings to camera and NVR
3.
Show Motion Region in Active-Monitor:
When this checkbox is checked, a red
rectangle representing the motion region will in Active-Monitor during live view if there is
motion activity. Please note that if the motion detection region was configured only in
camera and not through NVR, the live view camera title bar will turn red, but the motion
region rectangle will not show up in Active Monitor live view. Whether PIR motion sensor
activity will show red borders around the live view window is also controlled here.
4.
Set:
After checking/unchecking
“Show Motion Region in Active-Monitor”, click „Set‟ button
to save the setting. This setting applies to all cameras, regardless of which camera you
enabled it from.
5.
Enable / Disable Motion Detection:
Click this button to enable / disable this motion