www.acti.com
NVR 2.2 SP3 (V2.2.57) User’s Manual
31
Add or configure cameras via Copy setting
A third way is to utilize the Copy Setting function to add device to the NVR.
1. Go to Active Setup -> Camera Setup -> Camera. You must first select one camera from the
camera tree to copy settings from.
2. Click
“Copy Settings”, and the copy setting screen will appear as below.
3. You may select the types of settings you wish to copy from the item list below. You need to
select at least one type of settings to proceed. The Camera Data Target may be a new
device, or it may be an existing camera. If you select
“Add New Device”, then a new
camera will be created. If you select a particular existing camera, then the settings in NVR
for that camera will be overwritten.