www.acti.com
NVR 2.2 SP3 (V2.2.57) User’s Manual
105
4.
Tour:
Select PTZ Preset Tour from this drop down list. You can setup the Preset tour for
each camera in Camera Setup.
5.
Control Pad:
Click on this wheel to control PTZ movements.
6.
Zoom In/Out:
If the camera has controllable zoom, this will zoom the lens in or out.
7.
Focus In/Out:
If the camera has controllable focus, this will shift the focus of the camera.
Please note that if you use manual controlled focus, then auto-focus has to be disabled on
the camera side via web configurator. Otherwise the camera will return to the auto-focus
value once you finished the focus command.
8.
Iris In/Out:
If the camera has controllable iris, this will modify Iris level.
9.
Pan:
Set the Pan speed of the control pad.
10.
Tilt:
Set the Tilt speed of the control pad.
11.
Goto:
Go to a preset point. Just select the target from the drop down list. You must first
setup the preset point through NVR to use this.
12.
Action:
If you have special PTZ commands entered here, you may select from the drop
down list to issue that particular command.