![background image](http://html.mh-extra.com/html/acti/network-video-recorder/network-video-recorder_user-manual_2842787088.webp)
www.acti.com
NVR 2.2 SP3 (V2.2.57) User’s Manual
88
System
This section describes how to setup system-wide basic parameters.
Fig. 54 System Setup - System - System Property
System Property: NVR system setup
1.
Keep Event Log for (day):
The number of days to keep event logs for. The default is
45
days. Event logs older than this date will be deleted.
2.
Keep Recording Log for (day):
The number of days to keep recording logs for. The
default is 45 days. Recording logs older than this date will be deleted.
3.
Keep System Log for (day):
The number of days to keep system logs for. The default is
180 days. System logs older than this date will be deleted.
4.
NVR Streaming Port:
NVR Streaming Port. Default 6002
5.
NVR Control Port:
NVR Control Port. Default 6001
6.
Message Engine Port Number:
NVR Message Engine Port. Default 8001
7. IIS HTTP port:
IIS HTTP Port. Default 80.
If you have changed this port during IIS
setup, please be sure to change it here.
8.
OSD
– [FPS]:
Select this checkbox to display real time Frames Per Second info for each
channel on Active Monitor preview windows.
9.
OSD
– [Camera Name]:
Check this box to show camera names on the preview window in
Active Monitor. The location of the OSD text is defined in Camera Setup -> Camera ->
Media Source Information -> OSD Position
10.
Popup Message when event trigger:
A warning message will popup in Active Monitor
when an event is trigged. A sample message is shown below.
11.
Event status on Camera Tree:
Check this box to enable cameras with recently triggered
events to highlight and flash on the Camera Tree.
12.
Apply:
Confirm and save the settings in System.