ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
18
Error Indication Function
The switch output is activated, if the device has detected a failure behavior (see chapter diagnose/
failures).
Default > Hysteresis Function
Operating Mode
The operating mode defines the function direction of the switch output.
•
Normal Open / NO
At the output there is no signal, if the switch condition is not fulfilled.
At the output there is a signal, if the switch condition is fulfilled.
•
Normal Close / NC
At the output there is a signal, if the switch condition is not fulfilled.
At the output there is no signal, if the switch condition is fulfilled.
Default > Normal Open / NO
Signal output
The nominal values of the analogue signal (4/20 mA resp. 0/10mA resp. 0/10 V) refers to the set
display nominal values 0% and 100%
Operating Mode
Defines the type of the analogue output signal
•
4-20 mA
•
0-20 mA
•
0-10V
Default > 4-20 mA
Summary of Contents for Sonicont USN020
Page 45: ......
