ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
16
Output
The symbol E at a menu item indicates its position in the extended menu structure.
This extended menu structure can be shown in the submenu display by the menu item menu
structure.
Switch output S1 / S2 / S3 / S4
Enabled
Each switch output can be activated resp. deactivated separately.
•
Yes
•
No
Default > Yes
Switch Point / Reset Switch Point
The input values refers to the set display value or acc. to display scaling.
The reset switch point must be lower or equal to the switch point.
At inverse measuring principle, e.g. distance measurement, the reset switch point must be greater or
equal to the switch point.
The input range is limited to the measuring range.
Default > S1 = 20% / S2 = 40% / S3 = 60% / S4 = 80%
Summary of Contents for Sonicont USN020
Page 45: ......
